ENMP311-18B (HAM)
Materials 2
20 Points
Staff
Convenor(s)
Kim Pickering
4672
CD.3.03
kim.pickering@waikato.ac.nz
|
Lecturer(s)
Leandro Bolzoni
9381
F.G.06E
leandro.bolzoni@waikato.ac.nz
|
Rob Torrens
4684
E.2.07
rob.torrens@waikato.ac.nz
|
Administrator(s)
Librarian(s)
You can contact staff by:
- Calling +64 7 838 4466 select option 1, then enter the extension.
-
Extensions starting with 4, 5, 9 or 3 can also be direct dialled:
- For extensions starting with 4: dial +64 7 838 extension.
- For extensions starting with 5: dial +64 7 858 extension.
- For extensions starting with 9: dial +64 7 837 extension.
- For extensions starting with 3: dial +64 7 2620 + the last 3 digits of the extension e.g. 3123 = +64 7 262 0123.
Paper Description
This course will allow students at an advanced level, to experience the concept of Materials Science/Engineering. The emphasis, where possible, will be relevant to New Zealand conditions and will reflect the increasing demand required by industry in areas such as microstructure modification, new materials, fabrication techniques and engineering materials.
Paper Structure
This paper is taught through Lectures and Practical labs.
Practicals: Six 3 hour sessions run with a maximum of one per week - schedule to be announced during week 1. First practical session to be held in the week starting 16th July.
IMPORTANT NOTE for students - Laboratory Handbook
Please collect the Laboratory Handbook required for this paper, from the Waikato Print Shop during the first week of teaching. A printing fee is charged to the student on collection of the handbook.
Laboratory work forms a very important part of the Materials 2 paper and attendance at laboratory sessions is compulsory.
Important Note for International Students: For international students in New Zealand under student visas, regular attendance is part of your visa obligation and is checked as a requirement on the University under the Code of Practice for the Pastoral Care of International Students, to which the University is a signatory. Academic staff are formally required to monitor attendance in classes and submission of compulsory assessment events/items and to report to Waikato International in the event that any problem with irregular attendance or non-submission is not resolved.
Learning Outcomes
Students who successfully complete the paper should be able to:
Assessment
Assessment Components
The internal assessment/exam ratio (as stated in the University Calendar) is 50:50. The final exam makes up 50% of the overall mark.
Required and Recommended Readings
Required Readings
Online Support
Handouts for this paper will be available on Moodle for downloading as confirmed by the lecturer/s concerned. It will also be assumed that students check e-mail at the address recorded in Moodle at least once per day. PLEASE NOTE: Moodle will be used for class notices etc and it is your responsibility to check the site regularly. Instructions provided on Moodle and in lectures are considered to be given to the class as a whole.
Workload
The expected workload for this paper would be expected to average at approximately 46 hours for lectures, 2 hours for tests, 18 hours for labs 54 hours for assignments and 80 hours for reading and revision.
Linkages to Other Papers
Prerequisite(s)
Prerequisite papers: ENMP211